Browse Categories

· One Piece Grips

One Piece Grips
Colt SAA, Pieta 1873, EMF 1873, Colt Walker, Colt 1860 Army,
Pietta 1860 Army, Uberti 1873, Heritage Rough Rider Large Bore


One Piece or Two Piece Grips is a Frequently Asked Question.
It Can Also Be Confusing to Those New to the Terminology.

Two Piece Grips Have a Screw Hole, a Screw & a Nut & Escutcheon.

One Piece Grips Appear to Have 3 Pieces, When Being Purchased. No Screw Holes or Hardware & a Block for the Middle.
Once Assembled Properly, They Make a One Piece Grip.

Our Two Piece Grips Have a Spacer on the Back Side, to Index to the Backstrap, Already Glued On By Us.
The Built in Spacer Acts as the Locator.


If You Clean Your Firearm Frequently & You Don’t Want to Get Oils & Solvents on Your Grips, You Should Remove Them.
For Easy Maintenance, Two Piece Grips Can Be Removed Faster & Easier.

Take the Screw Out & Remove the Grips. Some Shooters Will Switch to Polymer Grips When It Is Raining.

To Remove a One Piece Grip, You Will Need to Remove the Two Screws on Either Side of the Hammer & the One at the Bottom of the Grip Frame.
Now the Backstrap & the Grip Can Be Removed.

If You Don’t Want to Remove a One Piece or Two Piece Grip for Gun Cleaning, Then Wrap It With a Cotton Cloth & Secure With Rubber Bands.

One Piece Grips Have a Smoother, Classier & More Expensive Look. A One Piece Grip Won’t Come Loose & You Can’t Lose the Screw.
Many Original Colt Firearms Were One Piece.
Also, Many Older Firearms or Colt Re-makes Have One Piece Grips, Like Pietta, Uberti, Colt Walker, Etc.

Two Piece Grips Can Make It a Little Easier to Inspect, Clean & Maintain Your Firearm.
Two Piece Grips Make It Easier to Switch Grips. You Can Crack or Damage Two Piece Grips by Over Tightening the Screw, So Tighten Gradually.

If You Do Not Know How to Install One Piece Grips, Check Out Our 2 Videos on Our Video Page: 
https://gungrip.com/gun-grip-videos-2.aspx,
or on You Tube: https://www.youtube.com/watch?v=IMaFsN4iWeM
& https://www.youtube.com/watch?v=httXaL5ehf
or Use a Good Gunsmith

You Do Not Want to Experiment Gluing on One Piece Grips Without Knowledge!

Displaying products 1 - 19 of 19 results
C173-1P
C173-1P Pietta 1873 SA Revolver Ivory-Like One Piece Grips, Smooth
Price: $45.00
C173-1P Pietta 1873 SA Revolver Ivory-Like One Piece Grips, Smooth
Pietta 1873 SA Revolver Ivory-Like One Piece Grips, Smooth.
C180-1P
C180-1P Heritage Rough Rider Large Bore SA Revolver Ivory-Like One Piece Grips
Price: $45.00
C180-1P Heritage Rough Rider Large Bore SA Revolver Ivory-Like One Piece Grips
Heritage Rough Rider SA Revolver Ivory-Like One Piece Grips, Large Bore, .45, .357 Magnum
C200-1P
C200-1P EMF 1873 SA Great Western II Revolver Ivory-Like One Piece Grips, Smooth
Price: $45.00
C200-1P EMF 1873 SA Great Western II Revolver Ivory-Like One Piece Grips, Smooth
EMF 1873 SA Great Western II Revolver Ivory-Like One Piece Grips, Smooth.
C210
C210 Colt Walker 1847 Revolver Ivory-Like Grips, Uberti Mfg
Price: $45.00
C210 Colt Walker 1847 Revolver Ivory-Like Grips, Uberti Mfg
Colt Walker 1847 Revolver Ivory-Like Grips, Uberti Mfg
DSH5-1
DSH5-1 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: $825.00
You Save: $275.00 (25 %)
DSH5-1 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-2
DSH5-2 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: SOLD
DSH5-2 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-3
DSH5-3 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: $825.00
You Save: $275.00 (25 %)
DSH5-3 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-4
DSH5-4 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: $825.00
You Save: $275.00 (25 %)
DSH5-4 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-5
DSH5-5 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: SOLD
DSH5-5 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-6
DSH5-6 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: $825.00
You Save: $275.00 (25 %)
DSH5-6 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-7
DSH5-7 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: $825.00
You Save: $275.00 (25 %)
DSH5-7 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-8
DSH5-8 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: $825.00
You Save: $275.00 (25 %)
DSH5-8 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
DSH5-9
DSH5-9 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
MSRP: $1,100.00
Price: SOLD
DSH5-9 Colt SAA Single Action Army Oversize Alaskan Dall Sheep Horn Grips
Colt SAA Oversize Real Alaskan Dall Sheep Horn Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
FWISA-1
FWISA-1 Colt SAA Oversize Real Fossilized Alaskan Walrus Ivory Grips
Price: $675.00
FWISA-1 Colt SAA Oversize Real Fossilized Alaskan Walrus Ivory Grips
Colt SAA Oversize Real Fossilized Alaskan Walrus Ivory Grips. Oversize To Fit Most Any SAA Style Revolver or Clone. Needs Fitting.
J210
J210 Colt Walker 1847 Revolver Imitation Jigged Bone Grips, Uberti Mfg
Price: $55.00
J210 Colt Walker 1847 Revolver Imitation Jigged Bone Grips, Uberti Mfg
Colt Walker 1847 Revolver Imitation Jigged Bone Grips, Uberti Mfg
MI130-3
MI130-3 Uberti Old Model P 1873 Siberian Mammoth Ivory Grips, One Piece
Price: $725.00
MI130-3 Uberti Old Model P 1873 Siberian Mammoth Ivory Grips, One Piece
Uberti Old Model P 1873 Fossilized Siberian Mammoth Ivory Grips, Smooth. Also Fits New Sheriff, 7th Cav & Artillery & Old Model Uberti Cattleman. Does NOT Fit Cimarron or Taylor.
RJBH210
RJBH210 Colt Walker 1847 Revolver Imitation Jigged Buffalo Horn Grips, Uberti Mfg
Price: $50.00
RJBH210 Colt Walker 1847 Revolver Imitation Jigged Buffalo Horn Grips, Uberti Mfg
Colt Walker 1847 Revolver Imitation Jigged Buffalo Horn Grips, Uberti Mfg
WISA-1
WISA-1 Colt SAA Real Alaskan Walrus Ivory Grips, Alaskan Native Artwork Design
Price: SOLD
WISA-1 Colt SAA Real Alaskan Walrus Ivory Grips, Alaskan Native Artwork Design
Colt SAA Real Alaskan Walrus Ivory Grips, Alaskan Native Artwork Design. Slightly Oversized To Fit Most Any SAA Style Revolver or Clone. May Need Fitting.
WW3
WW3 Colt SAA Single Action Army Walnut Grips, Oversize, 1 Piece
Price: $120.00
WW3 Colt SAA Single Action Army Walnut Grips, Oversize, 1 Piece
Colt Single Action Army Walnut Grips, Oversize, 1 Piece
Shopping Cart
Your cart is empty.
Products
Products
Best Sellers